Changelog v1.1

11/22/2024
(!) IMPORTANT: Inventory change.

- More structural supports added on the inner hull panels and body to reduce panel movement and flex.
- Updated the mounting technique for the underside dome sensor to make it stronger and much less likely to pop off when handling.
- Reinforcements to some plates that could fall off if bumped.
- Minor change to bridge tower face greebling.
- Added 1x1 plates to the edges of the panels to fill in some gaps.
- Swapped color on technic pins 3L (6558) to blue to reduce cost.

Steps with changes (inst. set v1.1):

== Body ==
85: 
	(2x) 60478 Plate, Modified 1 x 2 with Bar Handle on End, Light Bluish Gray
92-94: 
	Save leftover (1x) 2 x 4 plate, Dark Bluish Gray, from this step to use later (step 183).
	Take leftover (1x) 2 x 2 plate, Dark Bluish Gray, from dome sensor assembly and use here.
	(1x) 3176 Plate, Modified 2 x 3 with Hole, Dark Bluish Gray
	(1x) 3795 Plate 2 x 6, Dark Bluish Gray
	(1x) 3021 Plate 2 x 3, Dark Bluish Gray
101:
	(2x) 3941 Brick, Round 2 x 2 with Axle Hole, Light Bluish Gray
	(2x) 2654 Plate, Round 2 x 2 with Rounded Bottom, Dark Bluish Gray

== Bridge Tower ==
106:
	(2x) 3024 Plate 1 x 1, Light Bluish Gray
	Remove 1 x 1 slopes 45 double from build.
	
== Front Frame Extension ==
117/122:
	Color swap to Blue: 6558 Technic, Pin 3L with Friction Ridges
	
== Underside panel 1 ==
138:
	(1x) 3024 Plate 1 x 1, Light Bluish Gray
145:
	Take existing 2x4 tile in Light Bluish Gray from the underside nose and use here.
	(1x) 44861 Plate, Modified 1 x 2 with Open O Clip on Top, Light Bluish Gray
	Remove wedge plates, 2 x 3 and 2 x 2 from build.
146: 
	(1x) 2654 Plate, Round 2 x 2 with Rounded Bottom, Dark Bluish Gray
148:
	(1x) 3024 Plate 1 x 1, Light Bluish Gray
183:
	(1x) 2654 Plate, Round 2 x 2 with Rounded Bottom, Dark Bluish Gray
	(1x) 4032 Plate, Round 2 x 2 with Axle Hole, Light Bluish Gray
	(3x) 3660 Slope, Inverted 45 2 x 2 with Flat Bottom Pin, Dark Bluish Gray
	(2x) 3020 Plate 2 x 4, Dark Bluish Gray
184:
	(1x) 3069 Tile 1 x 2, Light Bluish Gray
185:
	(1x) 27263 Tile, Modified Facet 2 x 2, Light Bluish Gray
186:
	(1x) 99563 Minifigure, Utensil Ingot / Bar, Light Bluish Gray
	
== Underside panel 2 ==
200:
	(1x) 3024 Plate 1 x 1, Light Bluish Gray
207:
	Take existing 2x4 tile in Light Bluish Gray from the underside nose and use here.
	(1x) 44861 Plate, Modified 1 x 2 with Open O Clip on Top, Light Bluish Gray
	Remove wedge plates, 2 x 3 and 2 x 2 from build.
208: 
	(1x) 2654 Plate, Round 2 x 2 with Rounded Bottom, Dark Bluish Gray
210:
	(1x) 3024 Plate 1 x 1, Light Bluish Gray
244:
	(1x) 2654 Plate, Round 2 x 2 with Rounded Bottom, Dark Bluish Gray
	(1x) 4032 Plate, Round 2 x 2 with Axle Hole, Light Bluish Gray
	(3x) 3660 Slope, Inverted 45 2 x 2 with Flat Bottom Pin, Dark Bluish Gray
	(2x) 3020 Plate 2 x 4, Dark Bluish Gray
245:
	(1x) 3069 Tile 1 x 2, Light Bluish Gray
246:
	(1x) 27263 Tile, Modified Facet 2 x 2, Light Bluish Gray
247:
	(1x) 99563 Minifigure, Utensil Ingot / Bar, Light Bluish Gray
	
== Top panel 1
266:
	(1x) 3021 Plate 2 x 3, Dark Bluish Gray
	
== Top panel 2 ==
306:
	(1x) 3021 Plate 2 x 3, Dark Bluish Gray

== Underside dome sensor ==
333:
	(3x) 32028 Plate, Modified 1 x 2 with Door Rail, Light Bluish Gray